develop renkli fotokopi makinesi fiyatları

xerox arıza kodları

xerox arıza kodları 05322603702 xerox yazıcı arızaları xerox hata kodları xerox yazıcı hataları xerox servisi için arayın.

xerox arıza kodları
xerox arıza kodları

xerox arıza kodları

Xerox Error Codes
The following error list is carefully collected from various sources and should be consider as “information only”. It is strongly recommended to call a xerox technician to repair a machine. Self repairing may result in damage. Use CTL + F to quickly find your desired error code.
01-xx codes are standby power
01-301: Front door open
01-305 HCF or bypass door open
01-310 36 volt DC interlock
01-705 IOT overheat (not fuser)
01-710 IOT overheat (not fuser)
01A: DC voltage problem
01B: Can not power up
01C 36 volt DC power
01D: DC low volt problem
01E: Can not power down
01F: Can not clear message
01G: Can not power down
02-xxx Codes are user interface (UI)
02-309/364: UI power on self test error
02-311: ROS communication (Laser)
02-312/314/314: Communication problem with finisher
02-320/380/390/391: UI communication
02-705/706/707/709/712/715: UI software
02-711 RAM space
02-A: Cannot select machine feature.
02-B: LEDs blinking
02-C No display
02-D: Display too bright
02-E: User interface problem
02-F: Constant boot up screen
02-F: PO/PO message constant.
03.xxx codes are machine run control
03-301/305: SCAM board
03-311: ROS (Laser) error
03-312/313/314: Finisher communication
03-321: SCVM communication
03-322: SCVM download
03-325 Wall clock
03-330: Image processor to scanner
03-331/332: ESS communication
03-335: Finisher board accidental reset
03-336: SCAM board reset problem
03-337: ROS control module
03—338: Main board reset
03-340/341/342/343: IIOC bus 0, 1, 2, 3, 4 communication
03-345: IIOC all buses
03-346: Control panel
03-347: UI error
03-348: Main board
03-349: SCSI board
03-352: Auto segmentation board
03-354: Scan communication
03-355: MCB post
03-360: EP-SV communication
03-370/371/372/373/374/375: Control data
03-800: Main control board
03-801: Toner motor, user fan, IIOC board, distribution board or bus board
03-803/804/805/806: Tray1 or tray2 paper feed driver plate
03-808: IIOC board
03-809: Toner bottle motor, power on relay, dry ink dispenser, IIOC board
03-811: LVPS fan, IIOC board
03-812: Duplex wait clutch
03-813: Xerographic blower or erase lamp
03-815: Copy counter or resettable counter
03-820: Main control board
03-823/824/825/826/827: Tray3 or tray4 paper feed drive plates
03-828: Inverter reverse drive solenoid
03-829: Inverter entrance gate solenoid
03-831: HCF failure
03-832/833/834: Bypass problem
03-835: IIOC module decurler
03-836: laser fan, developer fan, registration clutch or IIOC boad
03-837: HCF
03-840: Main control board
03-841: OCT offset motor or OCT IIOC
03A: SCB distribution cable, distribution board or main control board
03B: CRUM, distribution cable, distribution board or main control baord
03C/ DE: IIOC bus 0, 1, 2
03F: Reset
03G: Main board
03H: Foreign accessory
03J: Checksum
03K: Atlanta gold and platinum main board; rev levels.
03L: IOT won’t boot
04.xxx codes are at start print power
04-201/202: Developer motor, vertical transport, duplex, registration or SCAM board
04-205/206: Photo-receptor belt motor or xerographic module
04-210/211: Fuser motor
The above list is created for C65/C75/M65/M75/Pro65/Pro75/240DC/240LP/240ST/255DC/255ST/265DC/265LP/265ST/460/470 series but may also be valid for other model.
More Codes
010-320 Fixing unit (located near the paper exit section) overheat.
1,001.46: The upper 525-sheet feeder had an over-current condition. The lift motor or clutch may be shorted.
1,002.47: The lower 525-sheet feeder had an over-current condition. The lift motor or clutch may be shorted.

  1. Unplug all connectors to the feeder.
  2. Remove the feeder and inspect the connector.
  3. Replace any damaged connectors either on the feeder or engine.
  4. Reset and reconnect the feeder.
    2,001.47: The print engine cannot detect the presence of the I/O Board.
    Check I/O Bard connections.
    Reseat the connections and power On the printer.
    Test I/O board wiring
    2,006.65: This fault code indicates a problem with the printer program. ROM could not be loaded.
    37,002.47:PEST Error – Printhead Left jetstack disconnect. The left jetstack is not drawing the expected power from the supply.
    Devices sharing the printer’s AC circuit shared, such as a laser printer, a coffee maker, or a space heater, may be placing heavy intermittent demand on the AC circuit. This sudden inductive demand creates momentary AC voltage sag that causes the PEST test to fail. Verify the AC power source prior to troubleshooting these errors.
    4,017.47: This fault code indicates a problem with the process control system. The ambient temperature is considered too cold to warm up the printer (less than 10o C).
  5. Verify the temperature of the room where the printer is located .
    Is the room temperature too cold?
    Ensure the printer is acclimated to the room temperature.
    4,024.42: This fault code indicates a problem with the wiper. The wiper is not aligned properly and engaged the head-tilt while in the waste lock position.
    042-326 IBT/Transfer belt problem, requires NVM access to reset. Clean/ vac excessive toner from the IBT belt and cleaner assy. Clean the silver patch on the belt; replace if worn. Also clean the IBT assymbly especially the rollers that come in contact with the belt (i.e. backup roll, idler roll, etc). In order to clear this condition, reset NVM location 741-105 to 0 by entering diagnostics.
    5,001.41: The Drum turned one full revolution without seeing the Drum home sensor activate.
    6,000.41: An X-Axis Motor current error occurred.
    The 7,007.49, 7,008.41, 7009.42, and 7,010.43 : Print-head was unable to tilt normally on its axis.
    The printer was powered off in the middle of a cleaning cycle and the Wiper Blade has frozen to the Print-head.
    A Drum Maintenance Camshaft lobe is broken and holding the Drum Maintenance Kit’s oil roller against the Drum when it should be retracted to its home position.
    Process Drive not being aligned correctly.
    A damaged Print-head Restraint.
    Ink spilled in the Roll Block preventing proper Print-head motion.
    8,005.48: The Media Drive stalled while moving the Wiper to home position.
  6. Check for paper in the paper path that is adding drag to the rollers. Look for paper or wiring interfering with the take away roller.
  7. Remove the Tray 1 Pick Solenoid to view the meshing of the Take Away Roller’s gears to the Media Drive Assembly.
    8,055.44: The Media Drive stalled while engaging head-tilt.Check for obstructions in the Wiper Assembly path.
    9,000.44: Ink Loader device fault
    Is the ink Genuine Xerox? Are they the correct sticks for the model?
    Manually verify that the ink stick is able o advance in the ink loader chute.
    Check for broken or wrong type ink sticks.

010-320 Fixing unit (located near the paper exit section) overheat.
You may also like: Richoh Error Code List

xerox arıza kodları
xerox arıza kaydı
xerox yazıcı arızaları
xerox 3040 arıza
xerox 3140 arızaları
xerox pe220 arızaları
xerox phaser 3117 arızaları
xerox phaser 3040 arıza
xerox phaser 3140 arıza
xerox phaser 6000 arıza
xerox hata kodları
xerox yazıcı hataları
xerox tarayıcı hatası
xerox kağıt sıkışması hatası
xerox kağıt yok hatası
xerox pe220 lsu hatası
xerox açık füzer hatası
xerox lsu hatası nedir
010-327 xerox hata kodu
xerox phaser 3040 hataları
xerox error codes list
xerox error 024-747
xerox error 016-910
xerox error 116-324
xerox error 016-781
xerox error 016-749
xerox error 018-505
xerox error 016-772
xerox error 027-452
xerox hota hai
xerox kaisa hota hai
xerox janwar kaisa hota hai
xerox kya hota hai
xerox kaise hota hai
xerox hawaii
xerox hawaii shooting
xerox hawaii service
xerox hawaii supplies
xerox hawaii phone number
xerox hawaii jobs
xerox hawaii warehouse
xerox hawaii address
xerox hawaii technical support
xerox hawaii ceo
xerox hata kodu
xerox hata kodlari
xerox workcentre 3045 hata kodları
xerox 010-320 hata kodu
xerox phaser 6000 hata kodları
xerox 062-371 hata kodu
xerox qatar
xerox qatar foundation
xerox qatar salwa road
xerox qatar careers
xerox qatar email
xerox qatar contact number
xerox qatar doha
xerox qatar opening hours
xerox qatar number
xerox qatar email address
xerox phaser 3140 hata veriyor
xerox yazıcı hata kodları
xerox error 116-357
xerox error 116-330
xerox error 127-211
xerox error 116-703
xerox error 116-331
xerox error 124-315
xerox error 116-313
xerox error 124-374
xerox error 24-747
xerox error 24-958
xerox error 27-516
xerox error 27-452
xerox error 27-779
xerox 250 error 042-326
xerox 252 error code 042-326
xerox 252 error code list
xerox 250 error 010-320
xerox 252 error code 127-211
xerox error 310-330
xerox error 303-331
xerox error 303.777
xerox error 342-345
xerox 3610 error 116-324
xerox 3655 error codes
xerox 3045 error 093-933
xerox 3345 error 07-500
xerox 3300 error codes
xerox 3615 error codes
xerox error 45-360
xerox error 47-210
xerox error 42-326
xerox error 47-320
xerox error 42-323
xerox error 4-049
xerox error 42-325
xerox error 45-363
xerox error 41-921
xerox error 45-310
xerox error 52768
xerox 5755 error codes list
xerox 5230 error codes list
xerox 5335 error code list
xerox 5225 error code 010-327
xerox 5335 error code 010-338
xerox 5021 error 092 910
xerox 510 error codes list
xerox 5335 error code 092-315
xerox 5225 error code list
xerox error 62-380
xerox error 60.02
xerox 6204 error codes
xerox 6505 error 116-324
xerox 6515 error 016-772
xerox 6605 error 116-324
xerox 6515 error codes
xerox 6510 error 016-748
xerox 6600 error 092-671
xerox 6515 error 016-910
xerox error 89-311
xerox 8830 error codes list
xerox 8580 error codes list
xerox 8880 error codes
xerox 8570 error 91 720
xerox 8570 error codes list
xerox 8900 error codes
xerox 8570 error 94 700
xerox 8560 error codes
xerox 8700 error codes
xerox error 91 720
xerox error 94 700
xerox error 91-320
xerox error 94-322
xerox error 91 721
xerox error 93-317
xerox error 92-572
xerox error 94 526
xerox error 92-315
xerox error 99