Etiket arşivi: xerox c70 error 024-747

xerox developer unit

xerox c60 c70 error codes

xerox c60 c70 error codes colour c60 c70 arıza kodu verince arayın 0532 2603702 colour c60 c70 servis yedek parça.

xerox c60 c70 error codes
xerox c60 c70 error codes

xerox c60 c70 error codes

xerox c70 error codes,
xerox c70 error 024-747,
xerox c70 error 127-210,
xerox c70 error 012-283,


xerox c70 error 016-757,
xerox c70 error code 093-316,
xerox c70 error 042-326,
xerox c70 error code 127-210,
xerox c70 error code 024-747,
xerox c70 error code list,
xerox c70 error 093-316,

xerox c60 error codes,
xerox c60 error 127-210,
xerox c60 error 042-326,
xerox c60 error 024-747,
xerox c60 error code 127-211,
xerox c60 error 010 320,
xerox c60 error 016-764,
xerox c60 error code 127-210,
xerox c60 error code 024-747,
xerox c60 error 016-767,
xerox c60 error 127-211,

Error Code Cause and Remedy 016-210 016-211 016-212 016-213 016-214 016-215 [Cause] An error occurred in the software. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the error still is not resolved, contact our Customer Support Center. 016-402 [Cause] The authentication connection timed out. [Remedy] Confirm the network connection and switch setting of the authentication device physically connected to the machine via a network, and check whether it is connected to the machine correctly. 016-403 [Cause] The root certificate did not match. [Remedy] Confirm the authentication server and store the root certificate of the server certificate of the authentication server into the machine. If you cannot acquire the root certificate of the server certificate, set [Server Certificate Verification] of [IEEE 802.1x Settings] to [Disabled] on the touch screen. 016-405 [Cause] An error occurred in the certificate stored in the machine. [Remedy] Initialize the certificate. 016-406 [Cause] An error occurred in the SSL client certificate. [Remedy] Take one of the following measures: Store an SSL client certificate in the machine, and set it as the SSL client certificate. If the SSL client certificate cannot be set, select an authentication method other than SSL. 016-450 [Cause] The SMB host name already exists. [Remedy] Change the host name. 016-454 [Cause] Unable to retrieve the IP address from DNS. [Remedy] Confirm the DNS configuration and IP address retrieve setting. 016-503 [Cause] Unable to resolve the SMTP server name when sending e-mail. [Remedy] Check on the Xerox® CentreWare® Internet Services if the SMTP server settings are correct. Also, check the DNS server settings. 016-504 [Cause] Unable to resolve the POP3 server name when sending email. [Remedy] Check on Xerox® CentreWare® Internet Services if the POP3 server settings are correct. Also, check the DNS server settings. are correct. 016-505 [Cause] Unable to login to the POP3 server when sending e-mail. [Remedy] Check on Xerox® CentreWare® Internet Services if the user name and password used in the POP3 server are correct. -.47.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 016-513 [Cause] An error occurred in connecting to the SMTP server. [Remedy] The SMTP server or network may be overloaded. Wait for a while, and then execute the operation again. 016-522 [Cause] LDAP server SSL authentication error. Unable to acquire an SSL client certificate. [Remedy] The LDAP server is requesting an SSL client certificate. Set an SSL client certificate on the machine. 016-523 [Cause] LDAP server SSL authentication error. The server certificate data is incorrect. [Remedy] The machine cannot trust the SSL certificate of the LDAP server. Register the root certificate for the LDAP server’s SSL certificate to the machine. 016-524 [Cause] LDAP server SSL authentication error. The server certificate will expire soon. [Remedy] Change the SSL certificate of the LDAP server to a valid one. You can clear this error by selecting [Disabled] for [LDAP – SSL/TLS Communication] under [SSL/TLS Settings] on the machine; however, note that selecting this option does not ensure the validity of the LDAP server. 016-525 [Cause] LDAP server SSL authentication error. The server certificate has expired. [Remedy] Change the SSL certificate of the LDAP server to a valid one. You can clear this error by selecting [Disabled] for [LDAP – SSL/TLS Communication] under [SSL/TLS Settings] on the machine; however, note that selecting this option does not ensure the validity of the LDAP server. 016-526 [Cause] LDAP server SSL authentication error. The server name does not match the certificate. [Remedy] Set the same LDAP server address to the machine and to the SSL certificate of the LDAP server. You can clear this error by selecting [Disabled] for [LDAP – SSL/TLS Communication] under [SSL/TLS Settings] on the machine; however, note that selecting this option does not ensure the validity of the LDAP server. 016-527 [Cause] LDAP server SSL authentication error. This is an SSL authentication internal error. [Remedy] An error occurred in the software. Contact our Customer Support Center. 016-533 [Cause] Kerberos server authentication protocol error [Remedy] The time difference between the machine and the Kerberos server exceeded the clock skew limit value set on the Kerberos server. Check whether the clocks on the machine and Kerberos server are correctly set. Also check whether the summer time and the time zone are correctly set on the machine and Kerberos server. 016-534 [Cause] Kerberos server authentication protocol error [Remedy] The domain set on the machine does not exist on the Kerberos server, or the Kerberos server address set on the machine is invalid for connection. Check whether the domain name and the server address have been correctly set on the machine. For connection to Microsoft® Windows Server® 2003 or Microsoft® Windows Server® 2008, specify the domain name in uppercase. 016-539 [Cause] Kerberos server authentication protocol error [Remedy] An error occurred in the software. Contact our Customer Support Center. 016-574 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the host or server name of the FTP server could not be resolved. [Remedy] Check the connection to the DNS server. Check if the FTP server name is registered correctly on the DNS server. -.48.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 016-575 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the DNS server address was not registered. [Remedy] Specify the correct DNS server address. Or, specify the destination FTP server using its IP address. 016-576 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because it could not connect to the FTP server. [Remedy] Ensure that both the destination FTP server and the machine are available for network communications, by checking the following: The IP address of the server is set correctly. The network cables are plugged in securely. 016-577 [Cause] Unable to connect to the FTP service of the destination server. [Remedy] Take one of the following actions: Check if the FTP service of the server is activated. Check if the FTP port number of the server is correctly registered on the machine. 016-578 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature due to unsuccessful login to the FTP server. [Remedy] Check if the login name (user name and password are correct. 016-579 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the scanned image could not be saved in the FTP server after connection. [Remedy] Check if the FTP server’s save location is correct. 016-580 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the file or folder name on the FTP server could not be retrieved after connection. [Remedy] Check the access privilege to the FTP server. 016-581 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the suffix of the file or folder name exceeded the limit after connection. [Remedy] Change the file name, or change the destination folder on the FTP server. Or, move or delete files from the destination folder. 016-582 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because file creation was not successful on the FTP server after connection. [Remedy] Take one of the following actions: Check if the specified file name can be used in the save location. Check if enough space is available in the save location. 016-583 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because lock folder creation was not successful on the FTP server after connection. [Remedy] Take one of the following actions: If any lock directory (.LCK ) exists in the forwarding destination, delete it manually, then try executing the job again. Check if the specified folder name can be used in the save location. Check if the same folder name exists in the save location. Check if enough space is available in the save location. 016-584 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because folder creation was not successful on the FTP server after connection. [Remedy] Take one of the following actions: Check if the specified folder name can be used in the save location. Check if the same folder name exists in the save location. Check if enough space is available in the save location. -.49.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 016-585 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because file deletion was not successful on the FTP server after connection. [Remedy] Check the access privilege to the FTP server. 016-586 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because lock folder deletion was not successful on the FTP server after connection. [Remedy] Take one of the following actions: Check the access privilege to the FTP server. If any lock directory (.LCK) exists in the forwarding destination, delete it manually, then retry executing the job. 016-587 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because folder deletion was not successful on the FTP server after connection. [Remedy] Check the access privilege to the FTP server. 016-588 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the data could not be written in the FTP server after connection. [Remedy] Check if enough space is available in the save location. 016-589 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because the data could not be read from the FTP server after connection. [Remedy] Check the access privilege to the FTP server. 016-593 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because an internal error occurred after connection to the FTP server. [Remedy] Try again. If the error persists, contact our Customer Support Center. 016-594 016-595 016-596 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature because a network error occurred. [Remedy] Try again. If the error persists, contact our Customer Support Center. 016-703 [Cause] The machine received e-mail which specified an invalid folder number. [Remedy] For errors occurring during e-mail reception: Take one of the following measures: Register the specified folder number, and request the sender to send the e-mail again. Request the sender to send to an available folder. If the error still is not resolved, contact our Customer Support Center. 016-704 [Cause] The folder is full, and hard disk capacity is insufficient. [Remedy] Delete unnecessary files from the folder, and save the file. 016-705 [Cause] Secure print documents cannot be registered because of hard disk malfunction. [Remedy]Contact the Customer Support Center. Refer to Secure Print. 016-706 [Cause] The hard disk space is insufficient because the number of Secure Print users exceeded the maximum limit. [Remedy] Delete unnecessary files from the machine, and delete unnecessary Secure Print users. 016-711 [Cause] The upper limit for the e-mail size has been exceeded. [Remedy] Take one of the following measures, and then try sending the mail again. Reduce the number of pages of the document. Lower the resolution with [Resolution]. Reduce the magnification with [Reduce/Enlarge]. Ask your system administrator to increase the value set for [Maximum Total Data Size]. For color scanning, set [MRC High Compression] to [On] under [File Format]. 016-713 [Cause] The passcode entered does not match the passcode set on the folder. [Remedy] Enter the correct passcode. -.50.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 016-714 [Cause] The specified folder does not exist. [Remedy] Create a new folder or specify an existing folder. 016-764 [Cause] Unable to connect to the SMTP server. [Remedy] Consult the SMTP server administrator. 016-765 [Cause] Unable to send the e-mail because the hard disk on the SMTP server is full. [Remedy] Consult the SMTP server administrator. 016-766 [Cause] An error occurred on the SMTP server. [Remedy] Consult the SMTP server administrator. 016-767 [Cause] Unable to send the e-mail because the address is not correct. [Remedy] Confirm the address, and try sending again. 016-768 [Cause] Unable to connect to the SMTP server because the machine’s mail address is incorrect. [Remedy] Confirm the machine’s mail address. 016-769 [Cause] The SMTP server does not support delivery receipts (DSN). [Remedy] Send e-mail without setting delivery receipts (DSN). 016-773 [Cause] The IP address of the machine is not set correctly. [Remedy] Check the DHCP settings. Or set the fixed IP address to the machine. 016-774 [Cause] Unable to process compression conversion because of insufficient hard disk space. [Remedy] Delete unnecessary data from the hard disk to free up disk space. 016-781 [Cause] Unable to connect to the SMTP server. Unable to establish a connection between the machine and the server. Although the connection between the machine and the server has been established, ASCII characters are not used for the host name specified on the machine. [Remedy] Take one of the following measures: Check whether the network cables are plugged in securely. Enter the host name using ASCII characters in [Tools] > [Connectivity & Network Setup] > [Machine’s E-mail Address/Host Name]. 016-788 [Cause] Failed to retrieve a file from the Web browser. [Remedy] Take one of the following measures, and then execute the operation again: Reload the browser page. Restart the browser. Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. 016-791 [Cause] Failed to access to the destination computer or the save location for Network Scanning. [Remedy] Check the directory configuration and files on the server, the access privileges for the destination or the location, and check if you are authorized to access the specified destination computer or server. 018-400 [Cause] When IPSec is enabled, there is an inconsistency in IPSec settings as follows: The password is not set when [Authentication Method] is set to [Preshared Key]. An IPSec certificate is not set when [Authentication Method] is set to [Digital Signature]. [Remedy]Check the IPSec settings, and enable IPSec again: When [Authentication Method] is set to [Preshared Key], set the password. When [Authentication Method] is set to [Digital Signature], set an IPSec certificate. -.51.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 018-405 [Cause] An error occurred during LDAP authentication. [Remedy] The account is disabled in the active directory of the authentication server, or the access is set to disabled. Consult your network administrator. 018-502 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because computers allowed to login are restricted. [Remedy] Confirm the property information for the specified user, and check whether the computers allowed to login to the server are restricted. 018-505 [Cause] Failed to log into the destination computer while transferring data using SMB of the Scan to PC service. [Remedy] Check whether the user name and password of the SMTP server registered in the machine is correct. 018-543 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because one of the following problems occurred on the shared name of the SMB server when logging in to the SMB server: The specified shared name does not exist on the server. Invalid characters are used in the specified shared name. When the server is Macintosh, the specified shared name may not have an access right. [Remedy] Confirm the specified shared name, and set the name correctly. 018-547 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because the number of users logging into the SMB server exceeded the limit when logging in to the SMB server. [Remedy] Take one of the following measures: Confirm how many users can access the shared folder. Check whether the number of login users have exceeded the limit. 018-596 [Cause] An error occurred during LDAP server authentication. [Remedy] Execute the operation again. If the error still is not resolved, contact our Customer Support Center. 018-781 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. Connection to the server cannot be established for the Address Book query. [Remedy] Take one of the following measures: Confirm the network cable connection. If the network cable connection has no problem, confirm the active status of the target server. Check whether the server name has been correctly set for [LDAP Server/Directory Service Settings] under [Remote Authentication Server/Directory Service]. -.52.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 018-782 018-783 018-784 018-785 018-786 018-787 018-788 018-789 018-790 018-791 018-792 018-793 018-794 018-795 018-796 018-797 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The server returned RFC2251 Result Message for Address Book query. [Remedy] Have your network administrator confirm the LDAP server status. 027-452 [Cause] IP address of IPv4 already exists. [Remedy] Change the IP address of IPv4 set on the machine or the IP address of IPv4 on the network device. 027-500 [Cause] Unable to connect to the SMTP server. [Remedy] Specify the SMTP server name correctly or specify the server by using its IP address. 027-706 [Cause] Unable to find the S/MIME certificate associated with the machine’s e-mail address when sending e-mail. [Remedy] Import the S/MIME certificate corresponding to the mail address to the machine. 027-707 [Cause] The S/MIME certificate associated with the machine’s email address has expired. [Remedy] Ask the sender to issue a new S/MIME certificate and import the certificate to the machine. 027-708 [Cause] The S/MIME certificate associated with the machine’s email address is not reliable. [Remedy] Import a reliable S/MIME certificate to the machine. 027-709 [Cause] The S/MIME certificate associated with the machine’s email address has been discarded. [Remedy] Import a new S/MIME certificate to the machine. 027-710 [Cause] No S/MIME certificate is attached to the received e-mail. [Remedy] Ask the sender to send the e-mail with an S/MIME certificate. 027-711 [Cause] No S/MIME certificate was obtained from the received e-mail. [Remedy] Import the sender’s S/MIME certificate to the machine, or attach an S/MIME certificate to S/MIME signature mail sent from the sender. 027-712 [Cause] The received S/MIME certificate has expired, or is an unreliable certificate. [Remedy] Ask the sender to send the e-mail with a valid S/MIME certificate. 027-713 [Cause] The received e-mail has been discarded because it might be altered on its transmission route. [Remedy] Tell the sender about it, and ask to send the e-mail again. -.53.- Xerox® Color C60/C70 Security Function Supplementary Guide Error Code Cause and Remedy 027-714 [Cause] The received e-mail has been discarded because the address in its From field was not the same as the mail address in the S/MIME signature mail. [Remedy] Tell the sender that the mail addresses are not identical, and ask to send the e-mail again. 027-715 [Cause] The received S/MIME certificate has not been registered on the machine, or has not been set to use on the machine. [Remedy] Import the sender’s S/MIME certificate to the machine, or change settings to use the S/MIME certificate on the machine when the S/MIME certificate has already been registered. 027-716 [Cause] The received S/MIME certificate has been discarded because the certificate was unreliable. [Remedy] Ask the sender to send the e-mail with a reliable S/MIME certificate. 027-717 [Cause] Unable to obtain SMTP server address for e-mail transmissions from the DNS server. [Remedy] Check whether the DNS server is set correctly.